Maintenance of the machine is an extremely important and regular task. It should be closely coordinated with extreme operations and maintenance. There should be full-time personnel on duty.
1. Rotary dryer installation test:
1. The equipment should be installed on a level concrete foundation and fixed with anchor bolts.
2. When installing, pay attention to the vertical direction of the main body and the horizontal.
3. After installation, check whether the bolts in all parts are loose and the main door is tight. If necessary, tighten them.
4. Configure the power cord and control switch according to the power of the device.
5. After the inspection is completed, the empty load test is carried out, and the test can be carried out normally.
2. Maintenance of rotary dryer:
1. The shaft bears the full load of the negative machine, so good lubrication has a great relationship with the bearing life. It directly affects the service life and operation rate of the machine. Therefore, the required oil must be cleaned and the seal must be good. Main oil filling (1) Rotary bearing (2) Roller bearing (3) All gears (4) Active bearing, sliding plane.
2. The newly installed tires are prone to loosening and must be inspected frequently.
3. Pay attention to whether the work of all parts of the machine is normal.
4, pay attention to check the wear level of wearable parts, always pay attention to replace the worn parts.
5. Place the bottom plane of the movable device, and the dust should be removed to prevent the movable bearing from moving on the chassis when the machine encounters unbreakable materials, resulting in serious accidents.
6, the bearing oil temperature rises, should stop immediately to check the reasons to eliminate.
7. If there is impact sound when the rotating gear is running, stop it immediately and check it out.
Main products: vacuum dryer , mixing granulator price, mixer manufacturer, micro pulverizer
1. Rotary dryer installation test:
1. The equipment should be installed on a level concrete foundation and fixed with anchor bolts.
2. When installing, pay attention to the vertical direction of the main body and the horizontal.
3. After installation, check whether the bolts in all parts are loose and the main door is tight. If necessary, tighten them.
4. Configure the power cord and control switch according to the power of the device.
5. After the inspection is completed, the empty load test is carried out, and the test can be carried out normally.
2. Maintenance of rotary dryer:
1. The shaft bears the full load of the negative machine, so good lubrication has a great relationship with the bearing life. It directly affects the service life and operation rate of the machine. Therefore, the required oil must be cleaned and the seal must be good. Main oil filling (1) Rotary bearing (2) Roller bearing (3) All gears (4) Active bearing, sliding plane.
2. The newly installed tires are prone to loosening and must be inspected frequently.
3. Pay attention to whether the work of all parts of the machine is normal.
4, pay attention to check the wear level of wearable parts, always pay attention to replace the worn parts.
5. Place the bottom plane of the movable device, and the dust should be removed to prevent the movable bearing from moving on the chassis when the machine encounters unbreakable materials, resulting in serious accidents.
6, the bearing oil temperature rises, should stop immediately to check the reasons to eliminate.
7. If there is impact sound when the rotating gear is running, stop it immediately and check it out.
Main products: vacuum dryer , mixing granulator price, mixer manufacturer, micro pulverizer
Dehydrated Carrot With Iso,Dry Carrot Cross Cut,New Crop Of Dehydrated Carrot,Dehydrated Vegetable Air Dried Carrot
Laiwu Manhing Vegetables Fruits Corporation , https://www.manhingfood.com