Nowadays, there are more metal detectors used in the food and pharmaceutical industries. It is really hard to find a good performance, but due to its special performance, the metal ball test method in the pharmaceutical industry has been It has become the industry standard test method for testing machine performance, and it is also a common method for comparing the performance of different test machines.
Those who have used metal detectors know that these detectors often test their performance through metal balls, rather than using metal contaminants such as iron wire, nails, metal shavings or stainless steel produced during the production process.
In actual operation, some metal detectors may not detect small metal in production, so the only solution is to install zui's new high-frequency detector to truly eliminate metal pollution. In the past , due to technical reasons, the detector could not be operated stably, so false alarms often occurred. Now this situation no longer exists, of course, the installation of zui's new high-frequency detector can not solve all problems. Because the size and packaging materials of each product are different. By changing the operating frequency of the metal detector, the wide-band metal detector can detect a wider variety of products while maintaining sensitivity. Sometimes, the detector detects different products of metal packaging materials and sometimes detects products of small or non-metallic packaging materials, so the detection frequency varies depending on the product. In this way, it is necessary to choose a broadband detector. The Ketuo KTD-PC series metal detector produced by Haikutuo Testing Equipment Co., Ltd., as above .
The Tusson Metal Detector maintains high detection sensitivity on the production line thanks to several design advantages, such as dynamic filtering and enhanced noise suppression (ENI) performance, which reduces electrical interference caused by air and Noise pollution; enhanced anti-vibration (EVI) performance, stable vibration and reduced unnecessary signal interference through advanced internal structure and coil system;
With the metal detector installed, it is OK to deal with the general problem , but in very strict cases, it is necessary to add other measures. Prevention is more important than correction or failure analysis. When measures are taken to reduce metal pollution , it is an important step to establish a strict control system ( such as GMP) . The so-called control point is the location where metal contamination can be detected on the product line, or where other quality problems occur. These point detectable methods or frequencies need to be pre-designed and coded for easy control.
Because metal detectors can't 100% eliminate metal pollution. Other channels should also be tested to reduce the risk of metal contamination. The training of quality inspectors is also very important. For example, the quality standards and control points of the company are introduced. The quality inspection records are detailed and the division of responsibility is clear. In fact, it is more effective to ensure that the production line does not produce metal contamination. For us, a piece of metal shavings also feels too much.
In general, the position of metal detectors in the pharmaceutical industry is very clear and indispensable!
Our Pp Resin has a very stable physical and chemical properties according to our professional tests. In addition to the great resistance of shocking strength and other mechanics performance, it also has a good processing performance. Our products have a high heat resistance property which allows us to apply the products in a high temperature environment. Also, the resin pellet has a lazy chemical property, it will not have a react with our daily medical medicine easily. And this also gives us a safety guarantee.
Pp Resin For Soft Bottle,Pp Copolymer Resin,Polypropylene Resin,Pp Homopolymer Resin For Bottle
SUZHOU CRH PHARMACEUTICAL TECHNOLOGY CO.,LTD , https://www.crh-health.com