Artificial propagation of thistle bud

In recent years, there has been an increase in the demand for commercial fish from the sea bream, and the demand for pod flowers has also increased. Although alfalfa blossoms naturally reproduce in flowing or still water, most of them are spawned sparingly due to environmental conditions, and fish eggs and fry are often swallowed by fish or other predators, resulting in a low survival rate. Artificial breeding can cause spawning of pupa spawns to concentrate spawning, increase the fertilization rate, hatching rate, and survival rate of fry, and achieve planned production. Artificial breeding techniques are described in detail as follows:

First, broodstock selection

First, brooded broodstock must be purebred; followed by broodstock should be robust, plump and disease-free, no serious damage; third, the proportion of males and females should be appropriate, generally 1:1; fourth, female broodstock should be 3 instar-4 Above age, weight 1.5 kg, male brood fish 2 years old - over 3 years old, weight 1 kilogram or more; Fifth, it is best to store broodstock one year prior to hatching, do not temporarily collect during the spawning season, broodstock bred in ponds as the most it is good.

Second, broodstock breeding

1. The development of gonads and the amount of eggs laid by pods have a great relationship with the quality and quantity of bait used by broodstock. Feeds for rearing broodstock must be diversified, and vegetal foods and animal foods should be taken into account to meet the needs of broodstock for various essential amino acids. Long-term feeding of single feeds must be avoided.

2. The mature process of gonadal development of broodstock broodstock needs a certain ecological environment. During the entire breeding process of broodstock, special attention must be paid to the regulation of water quality, and the oxygen level should always be ensured. Especially in the autumn, pool water is often accompanied by the tendency of aging. Always change the water and pay attention to maintaining a certain population of plankton in the water. To ensure the comfort of the broodstock environment, to maximize the accumulation of fish fat, to ensure the smooth production of eggs.

3. The broodstock cultivation process should pay attention to the broodstock breeding in the previous year. Because the broodstock has completed the growth phase of the egg cell in the winter, it is only necessary to feed a small amount of refined baits in the spring to help the broodstock restore its physique. If the broodstock was not cultivated the previous year, the gonads were immature, or because the plumpness was low and the physique was thin, the effect of artificial reproduction would be very poor.

Third, spawning

1. The pond area is 0.2 mu - 1 mu, the water depth is about 1 meter, the bottom of the pool is less silt, the water injection and drainage are convenient, the environment is quiet, and there is plenty of sunshine. Before the pond is used, it is required to disinfect the pond. When water is injected, it must be strictly filtered.

2, fish nest production, set up and management of the production of fish nest materials are palm skin, aquatic plants, grasshoppers and man-made fibers, etc., the fish nest requires a water to spread out, not sparse, dense, easy access, in line with thistle The ecological requirements for spawning are easy to use and must be sterilized before use. According to the number of spawning broodstocks, a corresponding number of fish nests are laid out, which are generally arranged at shallow water 1 meter away from the shore. The common arrangements are suspension-type and flat columns, with the best distribution in flat columns.

Management of fish nests should pay attention to the following points: correctly estimate the time of spawning and put fish nests in time; nests should not be put in too much, generally 4 to 5 tufts per female are used; Replace, spawning should be promptly removed after 1 hour, and replace the new fish nest into the pool.

3, aphrodisiac spawning measures can be used fish with high efficiency oxytocin injection I or II aphrodisiac, the amount of female fish 0.5 ml / kg body weight, male and female for the above dose of 1/3-1/4 can be.

IV. Incubation

1. Pond hatching There are two kinds of earth ponds and cement pools. The area of ​​the earthen pond is 0.5 mu - 1 mu, and the water depth is 1 meter. The concrete pool area is 20 - 50 square meters and the water depth is 50 - 80 cm. The hatching density is generally 3000 grains/m3 - 5000 grains/m3.

2. Drenching water incubation Drenching water incubation is to put the fish nest with fish eggs on the shelf in the indoor or plastic shed, and use artificial watering or water spray to keep the fish nest moist and control the proper temperature.

The hatching hatch should pay attention to the following matters: The room temperature is controlled between 20°C and 25°C during the incubation period; often use a jug to pour water, evenly spread all the fish nests, keep the fish eggs moist, must not make it dry; indoor should maintain saturation Humidity, to properly grasp the incubation time, at any time to move the fish nest hatching hatch.

3, de-viscous water hatching Detackling water hatching is the fish eggs after fertilization, remove the sticky eggs, and then hatching equipment for running water hatch. Detacking methods mainly include mud debonding method, talcum powder debonding method, and water debinding method.

V. Emergence

1. If the fish fry can be fed in parallel and the yolk sac disappears, they should be fed immediately.

2. Regulate the quality of water. Always refill the new water, but the water temperature difference before and after changing the water must not exceed 3°C. Do not add water while feeding; to avoid eating the top of the fish.

3, prevention and cure hot weather is easy to get bubble disease, pay attention to change the water. At the same time to clear frogs, dragonflies and aquatic insects.

Milk Cooling Tank / milk chilling machine for dairy farm  

Introduction of Leo milk cooling tank / milk chiller:

Milk cooling tank composed of refrigeration units and tank body as two major parts. Tank body made of high quality AISI stainless steel (food grade); insulation layer use polyurethane foam one time forming; compressor unit using the most advanced U.S. Copeland flexible scroll compressor; optional device including automatic cleaning devices, electronic metering device and heat recovery system; independent computer control system makes our milk cooling tank in intelligent automatic working condition. Our milk cooling tank features are:quick cooling speed, high efficiency and insulation ability , low noise, reliable, simple operation, no maintenance and on-site installation, long service life. Capacity from 500L to 12000L to meet the different needs of various customer groups.

Features and benefits of Leo milk cooling tank/ milk chiller :

  • Compact design;
  • Rapid and efficient cooling,( from +32ºC To +4ºC within 2 hours);
  •  Low energy and operation costs;
  •  High quality materials and quality craftsmanship;
  •  Microprocessor driven cooling and cleaning controls;
  •  Available in wide range of capacities.


Milk Cooling Tank

Milk Cooling Tank,Cow Milk Cooling Tank,Horizontal Milk Cooling Tanks,Farm Milk Cooling Tank

Henan Leo Husbandry Equipment Science and Technology Co.ltd , https://www.chinaleodairy.com

Posted on