Some robots never check or maintain parts of certain parts. As long as the parts are not bad, they are used all the time, and they become a blind spot in the maintenance of farm machinery. As a result, they are often prone to failure when the farmers are busy using farm machinery.
Some parts are in a state of hidden damage that is hardly noticeable to the naked eye. This is the case with rubber tube peeling. There was a farm vehicle that was emitting black smoke and was unable to work. After inspection, it was caused by peeling of the inner layer of the intake pipe.
Some failures are caused by gradual failure of some parts over time. This is the case with the softening of springs, the formation of cooling scales, and the like. The softening of the spring will have a serious impact on the normal operation of the locomotive. After the cooling system generates scale, it is easy to cause the engine to overheat due to poor thermal conductivity, which reduces the power and economy.
The machine operator believes too much in the manufacturing accuracy of the parts and ignores the pre-installation inspections. For example, the clearance between the piston ring and the backlash, if these gaps are too small, it is easy to cause the piston ring to be stuck or broken.
Therefore, to remind the hand of friends, in the daily maintenance and repair work must strengthen the inspection and maintenance of various parts of the agricultural machinery, leaving no dead ends; in the troubleshooting process does not miss any of a suspicious place.
SHANDONG JOIN & SHARE AGRICULTURAL DEVELOPMENT CO., LTD , https://www.joinsharemushroom.com