Glass bottle series filling production line process description

Glass bottle series filling production line process description

The device is powered on, and the self-test is completed without failure. The mesh belt machine is started, and the glass bottle is transported into the spiral groove of the winch motor; when the main engine is running, the main toothed belt is operated at a constant speed, and at the same time, the winch motor follows the main machine to keep the bottle position correct. Once a bottle enters the main toothed belt, the vial switch sends a signal to the filling mechanism and begins filling once the empty bottle has reached the following position of the filling mechanism.

After normal operation, if the bottle inspection switch detects that there is a bottle in the middle of a row of bottles, that is, the bottle does not arrive continuously, but there is a space in the middle, then this signal is sent to the filling mechanism, and the notification is at the position. The filling needle motor stops the filling action, and this signal is also sent to the stopper structure, and the plug is not sent in the bottle-unsaturated position. This is the so-called bottle-free, non-filled and bottle-free function. Otherwise, the medicine will be poured into the bottle-free position, the medicine will be wasted, and the machine will be contaminated. The bottle stopper in the bottle-free position will also fall down, which will affect the operation of the whole machine.

When the bottle-opening switch does not detect the bottle after a delay of 1-2 seconds, it means that no empty bottle has come in. At this time, the main machine and the filling mechanism will automatically fill the bottle that has been sent, and the host will wait. State, the host will start running automatically until the bottle arrives.

When the glass bottle series filling production line is in the automatic working mode, it can automatically stop the operation of the machine according to each alarm. When an abnormal emergency occurs, the emergency stop button can also be pressed to stop the operation of the machine.

When the fault is rectified and restarted, all motors can start normal operation from the origin.

There are also manual and jog modes. When in the manual mode, when the machine fails or the motor does not return to the origin, the machine can be operated under the condition that the automatic conditions are not met, or each motor can be operated and adjusted separately. Similarly, the emergency stop button can also Emergency stop the operation of the machine. When the machine is running in the jog mode, the machine starts to run after pressing the start button. All motors are synchronized according to the speed of the main motor. When all the actions are completed, the machine can automatically stop running.

In the zero-seeking mode, the position of the zero point of all motors can be realized. The current position is forced to zero by means of a write encoder.

The glass bottle series filling production line can be applied to bottles of various specifications. Each type of bottle can be stored after the parameters are set. The next time the specifications are changed, the parameters of the corresponding specification bottles can be called out. It is.