1. After the first operation of the beverage mixer for 10 hours, it should be fully inspected. If necessary, the joints must be tightened once.
  
2. After the beverage mixer has been running for 10 hours for the first time, check the tension of the V-belt. When tightening the V-belt evenly after tightening the screw, tighten the locking bolts of the motor seat plate to prevent loosening.
  
3. All parts of the beverage mixer should be kept clean, especially the inner wall of the mixing container and the refueling hole in the discharge hole should be cleaned. The beverage mixer should not be used to apply the anti-rust grease to the inner wall and the discharge part for a long time.
  
4. The beverage mixer should be inspected frequently, and it should be repaired and replaced in time when the damaged parts are damaged.
  
5. The electrical and beverage mixer should be inspected regularly, especially the heater, and the damage should be replaced in time.
6. The electrical control box should be cleaned regularly. It is necessary to clean the dust on the electrical components in time to prevent damage to the contactor contacts.
  
7, the motor should be stable when running, no abnormal sound, often check whether the temperature rise is normal
  
8. Whether the rotating parts such as spindle bearings and V-belt pulleys are running normally. If there is abnormal noise or vibration, stop immediately and check. If there are damaged parts, they should be replaced and repaired immediately.
  
9. When changing the color of the material machine, the mixing container and the discharge area must be cleaned.
  
10. The beverage mixer should not exceed the high loading factor of zui. When the beverage mixer is running, if adding plasticizer should be added slowly, the plasticizer should not be suddenly poured into the body, causing local material to agglomerate, resulting in a sudden increase in load and damage to the beverage mixer.
New product of U85 micro laser distance sensors use highly focused class 2 laser to detect objects or measure distances, and can return a measured value via varieties intface( serial, usb, rs232, rs485, bluetooth etc.). The electronic distance sensor is a very small Laser Distance Sensor, but high resolution up to 1mm and long distance measuring sensor - teachable measuring range of up to 30m. Extremely accurate distance sensing sensors, errors down to ± 1mm. And the mini sensors and measurements support continuous measurement function, great for compact solutions(eg: robots) with the smallest Laser Distance Sensor of the world!
Parameters of U85:
Accuracy
±1 mm (0.04 inch)
Measuring Unit
mm
Measuring Range (without Reflection)
0.03-20m/0.03-30m
Measuring Time
0.1~3 seconds
Laser Class
Class II
Laser Type
620nm-690nm, <1mW
Size
41*17*7mm (±1 mm)
Weight
About 4g
Voltage
DC2.0~3V
Electrical Level
TTL/CMOS
Certifications
CTNT, FDA, CE, FCC, RoHS, etc.
Operating Temperature
0-40 ℃ (32-104 ℉ )
Storage Temperature
-25~60 ℃ (-13~140 ℉)
Mini Laser Distance Sensor,Optical Laser Distance Sensor,Smallest Laser Range Sonsor,Laser Measuring Sensor
Chengdu JRT Meter Technology Co., Ltd , https://www.irdistancesensor.com