The beverage filling machine is a multi-functional beverage filling machine. The equipment is widely used. According to the customer's production capacity, the equipment is divided into a fully automatic filling machine and a semi-automatic filling machine. Compared with automation, it has fewer people and faster speed, and is used in mass production places.
Analysis and treatment of common problems in beverage filling machines:
First, the filling volume of the filling machine is not allowed or not discharged
1. The speed throttle valve and the filling interval throttle valve are closed, and the throttle valve cannot be closed;
2. Is there any foreign matter in the quick-installing three-way control valve? If so, please arrange it. There is air in the leather tube of the three-way control valve and the filling head. If there is air, try to cut or sweep the air.
3. Check if all seals are damaged. If there is damage, please replace them with new ones;
4. Whether the filling valve plug has a stuck appearance or delayed opening. If there is a jam, the valve core should be installed from the head. If the delay is opened, the thin cylinder throttle valve needs to be conditioned;
5. The elastic force of the spiral spring is tightened up and down in the three-way control valve, and the elastic check valve will not open;
6. Is the filling speed too fast, adjust the filling speed throttle valve, and lower the filling speed;
7, all the clamps, leather tube buckle can be sealed, if any, please correct;
8. The magnetic switch is not loose. Please lock it after each adjustment.
Second, the filling machine material has the following reasons from the back end of the material cylinder
1. Is the material cylinder in the center of the material cylinder bracket? If there is any change in the material cylinder, please install it from the head;
2. Is the cylinder piston and piston rod fastened, if it is loose, please lock it;
3. Whether the O-ring of the cylinder piston is damaged or not, if it is damaged, please replace it.
4. After the piston of the filling machine cylinder is pushed to the top, it does not return to the position of the movable magnetic switch. Press the emergency stop switch to adjust the active magnetic switch from the head.
Electric Heating Cape is quite similar to Electric Over Blanket. Their main difference is the shape. Heating cape is more like a clothes.
People can wear it during a cold night, and choosing the suitable heat setting to keep warm, as it has adjustable 4 temperature settings.
Heating cape is also not suggested to be used during sleeping.
It also has the function of automatic shut off, normally it is set up by 2 hours, which is approved to be the best for human health.
Below image as reference:
Electric Heating Cape
Electric Heated Lady Cape, Warmer Heated Cape, Fashion Winter Heated Cape, Adjustable Heated Cape
Ningbo Makeheat Electrical Appliance Co., Ltd , http://www.makeheat.net