First, you can't arbitrarily pull the steering handle when harvesting. Because of a handle, the harvesting opportunity is rapidly turned, the front part will overwhelm the uncut crops, and the overwhelmed crops will not enter the feed entrance, increasing the loss rate. Therefore, when the harvester is turning, it should be able to look in the right direction and once it is in position. Second, when turning and turning, pull the steering handle should be carried out after reversing. Because the scissor's parts come into contact with the crop as it advances, the harvester turns to bring the crop down. If you turn slowly when you recede, the scissors components are separated from the front uncut crop and will not bring down the crop. Third, insect injury should be low-speed slow harvest. Because of the easy breakage of insect-damaged leaves, it is difficult to separate them because they are mixed with grains. If the power machine speed is low. Harvesting speed is fast, the grain will blow to the ground with the loquat leaf. Fourth, it is better to reverse when going up the slope. The front of the combine harvester is light and goes uphill over the field. The front of the harvester is lifted high. When the center of gravity is moved, it will fall suddenly and it is easy to damage the mechanical parts. The operator is also easily injured.
Amy Hookah,Good Quality Zinc Alloy Hookah,Zinc Alloy Hookah
Hookah,Glass Hookah Co.,LTD , http://www.china-shisha-hookah.com