After fattening the sheep, it can significantly increase the production of lamb meat. It can usually increase the weight of the sheep's cockroach by 25% to 30% and improve the carcass quality.
1. Preparation and basic requirements before fattening
Sheep fattening is generally divided into lamb fattening and adult sheep fattening. Feeding standards and fattening rations should be based on local sampling, use roughage as much as possible to meet the energy needs of the ration, the lack of appropriate adjustments to make up the fine material. The protein portion of the diet should also first consider the cake-based plant-based high-protein feed to reduce feed costs. In order to finish the fattening in the whole period, it is not easy to change the feed. In the diets mainly including grain feed, cotton and rapeseed cake, the calcium content can be increased by 0.5% to prevent urinary stones. The length of a large sheep's feeding trough should be 40 to 50 cm, and lambs 25 to 30 cm in age should be born. Pay attention to drinking water hygiene, summer sun protection, winter frost protection, must ensure that there is enough clean drinking water, constantly salt. The sheep's house is dry on the ground and has good ventilation. The sheep only has a resting area, when the lamb was 0.8-l square meters, and the big sheep was 1.1-1.5 square meters. It is necessary to do a good job of the sterilization of the fattening pens and the deworming work before the sheep enters the circle, and to inject the quadruple seedlings to prevent intestinal toxaemia; if it is wool sheep, shearing before fattening is beneficial to weight gain, and the old ewe make it Pregnancy is also conducive to gaining weight. When lambs and mature sheep are fattened in the same year, regardless of whether it is used for fattening or general fattening, there is a pre-feeding transition period. The pre-feeding period is generally 10 to 15 days. If the lambs are fed 1 to 3 days of hay, the lamb is adapted to the new environment. After this, it is still dominated by hay, but diets are added step by step, all feeds are fed on the 7th day, and on the 10th or 15th day, adult sheep can be pre-fed for 10 days. Do not feed on wet, mildew, spoilage feeds, and avoid overcrowding and contention during feeding.
2. Lamb fattening
Lamb fattening Generally lambs slaughtered at 6 to 8 months old can obtain 16 to 20 kilograms of carcass, which has a high lean meat percentage, a high feed remuneration of 3 to 4 to 1 and an adult sheep of 6 to 8 to 1. The 130-kilogram lambs with good body weight and good nutrition were fattened. The planned daily weight gain was 280 grams or more. The reference diet was 0.27 kg of wild hay and alfalfa hay (1:5 ratio), 1 kg of corn, and cotton seed cake. 0.26 kg, 3.8 g of limestone. The 24-month-old weaned lamb had an average live weight of 26 kg. The planned daily weight gain was 200 grams. The reference diet was 0.27 kg of hay, 0.4 kg of corn, 0.2 kg of cotton seed cake, and 0.22 kg of wheat bran. Limestone 3.8 grams.
3. Adult sheep fattening
(1) Summer fattening. In summer, grazing and fattening are the main factors, supplemental concentrates are properly fed, and 5 to 6 kg of green feed and 0.4 to 0.5 kg of concentrate are eaten daily, equivalent to 1.6 to 1.9 kg of dry matter and 150 to 170 dry matter. Gram digestible protein, daily gain 120 to 140 grams.
(2) Fall fattening. The main source of fattening sheep in autumn is the elimination of aged ewes and thin sheep. Generally, the fattening period is longer, reaching 80 to 100 days. The amount of feed is large, the daily weight gain is low, and the feed conversion rate is not high. There are also ewes that will be eliminated. Transferred into the autumn pasture grazing and into the farmland autumn grazing, and after the improvement of lyrics and then into the circle to feed fattening to reduce the fattening expenditure. There should be a certain amount of succulent feed in the diet for culling ewes. Such as silage corn mixed grains, straw and so on.
(3) feed pellets. It is advisable that sheep fattening be fed to pelleted feedstuffs in conditional areas, and straw feedstuffs should be used as much as possible. The proportion of straw in the fattening diets of the sheep is 60%. Generally, lambs aged 6 to 8 months can gain 9.5 kilograms in 50 days, with an average daily weight gain of 190 grams. The granular feed formulation used was 55% to 60% straw and grass powder, 35% to 40% concentrate, 3% minerals and vitamins, and 1% urea. Feeding pellet feeds is best done with automatic feeders that are fed by fattening sheep and ensure continuous drinking. The daily intake of sheep from 6 to 8 months of age was 1.8 to 2 kg, and that of adult sheep was 2.5 to 2.7 kg. Appropriately feed some hay in the afternoon, each 0.25 kilograms, in order to facilitate rumination, feeding 2 times a day is appropriate.
Medical protective masks are masks made of one or more fabrics that have isolation effects on viral aerosols, virus-containing liquids, and so on. Under the respiratory airflow, it still has a barrier effect on viral aerosols, virus-containing liquids, etc., and when removed, the outer surface of the mask does not contact the human body, can filter particulates in the air, and block droplets, blood, body fluids, secretions, etc. . The use of medical masks includes adhesion testing, training, model selection, medical treatment and maintenance.
Function and composition: The medical protective mask consists of a mask face and a tightening belt. The mask face is divided into three layers: inner, middle and outer. The inner layer is ordinary sanitary gauze or non-woven fabric. Propylene fiber melt-blown material layer, the outer layer is non-woven fabric or ultra-thin polypropylene melt-blown material layer. This high-efficiency medical protective mask is highly hydrophobic and breathable, and has a significant filtering effect on tiny virus-carrying aerosols or harmful fine dust, and the overall filtering effect is good.
The medical protective mask has a good fit with the wearer's face, can filter particles in the air, block pollutants such as droplets, blood, body fluids, secretions, etc., and can filter non-oily particles by more than 95% Personal protective equipment commonly used to deal with airborne diseases.
Scope of application: Medical protective masks are better protective products. It is recommended to wear when there is serious environmental pollution or sudden medical infectious diseases (such as respiratory tract infectious diseases), to prevent the spread of viruses from patients or the environment to users.
Product specifications: According to the national standard GB 19083-2003 "Technical Requirements for Medical Protective Masks", important performances of medical protective masks include filtration efficiency, adhesion, liquid barrier performance, comfort, hygiene, and biological safety tests.
Important technical indicators: including non-oily particle filtration efficiency and airflow resistance.
(1) Filtration efficiency: Under the condition of air flow (85 ± 2) L / min, the filtration efficiency of aerodynamic median diameter (0.24 ± 0.06) μm sodium chloride aerosol is not less than 95%.
(2) Tightness: The overall fit factor of the mask should not be less than 100.
How to use: How to wear a head mask
(1) Gently pinch the nose clip and place the mask on the face to ensure that it can cover the nose and mouth.
(2) The upper elastic band is fastened on the head to prevent air from entering.
(3) Tighten the lower elastic band around the neck.
(4) Be sure to fully open the mask to minimize the number of layers used during breathing.
How to wear earhook masks
(1) Pass the ear straps with both hands, place the nose clip on the upper part, and wear the mask on the nose and mouth
(2) The ear strap should be placed at the base of the ear and spread from head to toe, so that the folds of the mask are fully unfolded, which helps to cover the face to the greatest extent and minimize the number of layers required for breathing.
(3) Gently pinch the nose clip to prevent air from entering.
Protective Mask,Medical Protective Mask,Disposable Medical Protective Mask,Disposable Medical Protective Face Mask
Guangzhou Aikangli Medical Technology Co., Ltd. , https://www.aikanli.com