When using a new or overhauled tractor, it must be run-in, otherwise the service life will be reduced. The running-in of the tractor is divided into three stages: no-load operation of the engine, running of the tractor in idle and load running. The running time of each stage and the size of the load during the operation of the load shall be determined in accordance with the instructions for use; the running-in and precautions of each stage shall also be emphasized. No-load operation of the engine: During operation, check the stability of the engine at various speeds and its operating conditions. Pay attention to listen, observe the operating sound, exhaust color, readings of each meter and check to eliminate "three leaks". The tractor runs in a row: through the operation of the speed of each gear, check whether the steering, brake, clutch, running mechanism, etc. are normal, and check whether the temperature at each bearing is normal. If abnormalities are found, they should be promptly adjusted. Tractor load operation: through a planned shift, check engine speed performance, engine oil and water temperature, fuel consumption, smoke color, smell and so on. Check for clutch slip, brake performance, and gliding distance after picking. Through the above inspection and adjustment, it can provide a reliable basis for normal use. In the running-in, you should always check the lubricating oil. If you find that there are too many metal crumbs in the oil, you should check it carefully. If necessary, clean and replace the lubricating oil. Careful maintenance after running in. The contents of the maintenance, in addition to the items specified in the manual, also determine whether or not to carry out maintenance of more items according to the conditions of running-in, manufacturing, and quality of overhaul.
Medical Compressed Air Plant
The
medical compressed air plant consists of the air compressor, general
filter, aftercooler, precision filter, desiccant air dryer, air buffer
tank, activated carbon filter, compressed air quality monitor,
decompressor, valve, pipeline and terminal. The system generates
compressed air through an air compressor, removes the impurities, oil
mist and moisture in the compressed air through an adsorption dryer
filter unit, delivers the air to the air storage tank and supplies it
through a pipeline to the terminal equipment in the operating room, ICU
and other inpatient wards after decompression.
Medical Compressed Air Plant
Medical Compressed Air Plant ,Hospital Gas System ,Hospital Gas Pipeline System ,Medical Air Compressor
Hunan Eter Electronic Medical Project Stock Co., Ltd. , https://www.eter-tech.com