First, build a pit. The air-conditioned open space is used as a pit bed, and the length and width are determined by the yield and the topography. The general length and width ratio is 3:1, and the depth is 60 cm. It is made of brick. Half of the beds are in the ground and half above the ground. The bed was first covered with 10 cm thick soil, and the soil was covered with 5 cm thick straw soaked in water. 500 species of quail per square meter.
Second, stock preparation. Commonly used feeds include garbage, cow dung, pig dung, sheep dung, chicken dung, bean curd residue and weeds, leaves, sawdust, and the like. In order to increase production, a certain amount of protein additives may be appropriately added. Before feeding, forage and feces should be stacked in layers, each layer 6-7 cm thick, each layer of 3-5 layers poured 1 water. When the feed is fermented, turn it up and down 1-2 times. After more than 10 days, when it is brown, feed it.
Third, introduction. To breed with the improved pheasant breeders, do not raise pods that they dig in the wild. The breeding rate of the bred species is about 10 times that of the common quail. Each quail can be bred one on average each day, and it has stronger vitality than ordinary crickets. No.2, North Star No.2, Hubei Huan Mao Yuan and Ai Sheng Chi Zi Yi.
Fourth, control. The optimum density for quail breeding is 2.8-3.1 kg per square meter or 20,000 per square meter. Within this range, less seeding and high yield are required. The breeding density of early larvae may be slightly larger than 30,000 per square meter or 2.5 kg per square metre; the rearing larvae to adult breeding density can be gradually reduced to about 20,000 per square meter.
Fifth, additional material. If you eat feed, you usually eat on the surface. When you find that the feed becomes darker and finer, feed is added. Wet and wet are afraid of dryness, and the pit bed should be kept moist without water accumulation. The suitable ground temperature is 15-30°C.
Six, cleaning manure. The manure should be removed in time, otherwise it will affect the growth. Cleaned manure can be used as a "parasitic method": New feeds are piled up beside the manure and old feed piles. The scent is sensitive and it will climb into the new feed after more than 40 hours. The mixture of excrement and eggs that has been cleared out is piled up elsewhere. The top is covered with wet straw and shading and heat insulation. Usually about 20 days, hatchlings can be hatched.
Seventh, prevent damage. Farming crickets should pay attention to preventing escape and preventing predators. Its predators are: snakes, rat frogs, ants and so on. In general, the bed should be covered with a thin iron gauze. Arch plastic sheds (ventilated windows on sheds) can also be built to control temperature and prevent predators.
Eight, harvest. The quail breeds very quickly and has different habits of grandfathers and grandfathers. If they are not harvested in time, they will flee, and polyculture will also cause inbreeding and degrade the species. Therefore, when grow into a pupa and the cubs have been hatched in large numbers, they should be harvested in time and not delayed. Otherwise, it will have a multi-faceted impact on quail culture. The methods for harvesting lotus root include:
1. Water flooding method: If you are afraid of flooding, use this habit of squeezing. Rinse water in the pit, and fill 2/3 of the lower part of the feeding base with water, leaving 1/3 of the surface, and the squid floats quickly on the base material. Surface, can be scraped out.
2 trapping method: 蚯蚓 like to eat sour, sweet, wolfberry food, use this habit to put rotten tomatoes on the surface of feeding base, rotten apple, watermelon rind or boiled water or boiled sweet potato water decomposed cow dung or wash Fish, water, etc., like to eat food. The larvae are very scented and will crawl out of the earth's surface to eat. They can be collected and harvested.
3. Direct access method: The advantage of this method is that it can complete the whole process of extracting the earthworms in the culture pit; the disadvantage is that it is not easy to take small and large plants if the size is mixed. For example, the size of the polyculture must be separated from the upper layer containing eggs and feces, then the base material is evenly loosened and moved to the side, and the bottom layer will be drilled, and then the base material will be moved to the side layer by layer, if there are multiple Cultivating pits can be arranged together, and they can be stratified alternately one by one. This can greatly increase labor efficiency. If the size of polyculture, you must leave a suitable amount of reserve, to do a good job feeding, watering, cover work. Under good conditions, it can be harvested in about 20 days.
Most of the facial wrinkles are caused by facial muscles. Using botulinum toxin (Botulax and Meditoxin) injections to reduce the formation of wrinkles and facial muscles. The facial wrinkles are flattened. It has good effect to remove brow wrinkles, forehead wrinkles, eyelids, mouth wrinkles and nose bridge wrinkles.
*Modify face type
The square face can be treated by the principle of paralyzing muscles, muscle atrophy and muscle volume becoming smaller. The effect of muscle atrophy to correct the square face can last for about 1 year.
* Skinny legs
Inject botulinum toxin into the calf, paralyze some of the calf muscle tissue, induce muscle atrophy and slim the thick calf, showing a soft curve.
Botulax and Meditoxin
Dermax Technology Limited , https://www.dermaxmed.com