I. Product Introduction Gem Biogas Material is a cutting-edge biogas accelerator developed through advanced microbiological engineering techniques from the US, Japan, and South Korea. It combines proprietary technology with natural microbial strains to create a high-performance aerobic fermentation agent. This product is ideal for breaking down various agricultural residues such as crop straw, leaves, and forage. It effectively degrades complex compounds like lignin, cellulose, hemicellulose, pectin, and waxes, increasing the surface area available for microbial action. This leads to faster decomposition, reduced crusting, quicker start-up, and improved gas yield and efficiency. II. Key Features 1. **Faster Gas Production** Straw is hard to digest due to its tough structure. With Gem Biogas Rot 1202, the straw undergoes rapid aerobic pre-treatment, significantly reducing the time required before it can be fed into the digester. This can save over 60% of the time compared to natural decomposition. 2. **Prevent Crusting** The wax layer on straw can block microbial access. Using this product breaks down the wax, allowing better digestion and increasing gas output by up to 50%. 3. **Enhanced Gas Yield** After pretreatment, the fermentation process becomes more efficient. When used with Gem Biogas Fermenting Agent, gas production can increase by 50–100%, with more stable and consistent output. This reduces labor and operational costs. III. How to Use 1. **Prepare the Raw Materials** Take 10–15 kg of dry straw (about 1–2 tons), cut it into 60 mm pieces, and optionally crush or knead it. This helps break down the waxy surface and increases contact with bacteria, speeding up the process. After preparation, gas production can increase by around 20%. 2. **Create a Bacterial Heap** Mix 2.5 kg of urea (or 250 kg of poultry manure) with 150–200 kg of water. Apply evenly to the straw material until the moisture level reaches 60–70%. The material should feel damp but not soggy. Let it soak for a few hours, then pile it up (1m high, 1.5m wide). Press the pile to reduce volume and cover it with a breathable tarp. Leave it for 12–24 hours. On the second day, mix 1 kg of Gem Biogas Rot 1202 with 5–10 kg of rice bran or corn flour. Spread this mixture evenly over the pile and sprinkle it thoroughly. Cover again with a breathable tarp to protect from sunlight and rain. 3. **Aerobic Fermentation** In summer, the process takes 2–3 days; in winter, 3–5 days. When the pile feels hot (50–60°C), it’s ready. The straw should be soft, dark brown, and easily broken by hand. At this point, it’s ready to be placed into the biogas digester. By using Gem Biogas Rot 1202 for aerobic pretreatment, followed by biogas fermentation, you can achieve higher gas yields, faster production, and greater efficiency. For more details, visit our website or contact us directly.
Dried chilli slices
Sichuan Liuhang Agriculture Co.Ltd , https://www.lhagriculture.com