The beater has a simple structure and can be installed on its own. The method of manufacture is: use a medium-length carbon steel with a length of 93 cm and a diameter of 4 cm, a bearing for two-axle bearings (a position for leaving a passive disk), ball bearings, bearing tubes, and shafts There are 7 holders of the upper spiral device, which are welded by electric welding. Two holes with a diameter of 10 mm are drilled on each holder. 7 small steel knives, each 26 cm long, 4 cm wide head, the drill head drilled two 10 mm eye holes, with a screwdriver head screwed on the handle. Then, a long oval-shaped pool of 2.2 meters in length, 1.6 meters in width, and 0.6 meters in depth was built with bricks (leveled with external cement), and a slurry port was left at the bottom of the tank. In the pool, a long oval-shaped pier is built with cement and has the same height as the pool edge. Then, the end of the beater without a passive disk is fixed on the abutment, while the end with a passive disk is fixed on the edge of the pool on the other side. The passive disk is located on the outside of the pool and is driven by a motor with a power of 3 to 4 kW. For safety and prevention of grass splatter, a wooden cover is made and covered in a beating pool.
When beating, first put appropriate amount of water in the pool, start the machine to run normally, and add green feed to the grasshopper gradually. When it is slurried, you can open the pulp outlet and release the straw. Generally, it can play 1200-2000 pounds of green feed every hour. In the straw, the pigs loved it. If one third of the dry material is mixed with a small amount of salt, the effect will be better. This kind of straw can also be mixed with appropriate amount of crushed roughage for fermentation, or the water can be adjusted to about 20% and can be stored in a silo.
Our Incubator/Radiant Warmer Products is good in quality and competitive in price. We are manufacturer and supplier Incubator/Radiant Warmer Products following your specific requirement. We are looking forward to your E-mail and establishing cooperative relationship with you! We would provide professional Incubator/Radiant Warmer with good services for you!
Incubator/Radiant Warmer
Infant Radiant Warmer, Infant Phototherapy Unit, Radiant Warmer for Newborn, Luxurious Infant Incubator
Ningbo Cland Medical Instruments Co., Ltd. , https://www.cland-med.com